Qinyi Electronics Co.,Ltd QYSMT
Qinyi Electronics Co.,Ltd(QYSMT) SMT Spare parts.One-stop Platform For All SMT.
Add to Cart
Advantage
1, Arch bridge type suspending direct-connected scraper.
2, Print head with the programmable and suspending self-adjusting stepper motor drive.
3, Four wheel positioning slide type with bilateral double sliders ensures the moving accuracy and stability when scraper is running back and forth.
4, Unique belt transmission system avoids being stuck or fall-off of PCB.
5, Programmable motor controls transport speed and puts PCB in the precise position.
6, The unit to clean is separated from CCD camera, which can minimize the load of motor and impulse, improve the positioning precision and speed and extend the service life.
7, With Stepper motor and lead screw, the direct connection UVW platform is featured with high precision, high rigidity and compact structure.
Specifications
| Screen Frames | Min Size | 737X400mm |
| Max Size | 1100X900mm | |
| Thickness | 25~40mm | |
| PCB Min Size | 50X50mm | |
| PCB Max Size | 900X600mm | |
| PCB Thickness | 0.4~8mm | |
| PCB Warpage | ＜1% | |
| Transport Height | 900±40mm | |
| Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right | |
| Transport Speed | Max 1500mm/S Programmable | |
| Board Location | Support System | Magnetic Pin/Up-down table adjusted/supportblock by hand |
| Clamping System | side clamping,vacuum nozzle | |
| Print head | Two independent motorised printheads | |
| Squeegee Speed | 6~200mm/sec | |
| Squeegee Pressure | 0~30Kg | |
| Squeegee Angle | 60°/55°/45° | |
| Squeegee Type | Stainless steel(Standard), plastic | |
| Stencil Separation Speed | 0.1~20mm/sec Programmable | |
| Cleaning System | Dry,Wet,Vacuum (Programmable) | |
| Table Adjustment ranges | X:±10mm;Y:±10mm;θ:±2° | |
| CCD FOV | 8x6 mm | |
| Solder Paste lnspection | 2Dlnspection ( Standard ) | |
| Repeat Position Accuracy | ±0.01mm | |
| Printing Accuracy | ±0.025mm | |
| Cycle Time | <12s (Exclude Printing & Cleaning) | |
| Product Changeover | <5Min | |
| Air Required | 4.5~6Kg/cm2 | |
| Power Input | AC:220±10%,50/60HZ 1Φ 3KW | |
| Control Method | PC Control | |
| Machine Dimensions | 1580(L)X1530(W)X1500(H)mm | |
| Machine Weight | Approx:1400Kg | |